User's Manual

Diagnostic Messages
X.25 Diagnostic Messages
Appendix C258
72 (CLEAR) Call
collision.
When configured as DCE, CALL
INDICATION was received on logical
channel where CALL REQUEST had
been sent. CALL REQUEST was
cleared because the CALL
INDICATION has priority.
73 (CLEAR) Duplicate
facility
requested.
Same facility code appeared twice in
the facility field. Error is returned to
caller if condition was detected in
CALL REQUEST. CLEAR was not
generated.
76 (CLEAR) Facility not
provided
when
expected.
When system was configured to handle
IP over X.25 as per DDN
specifications, CALL INDICATION for
IP did not have DDN standard
selection facility code.
Table C-6 CATEGORY - Miscellaneous
Diagnostic
ISO
Description
Explanation
83 (CLEAR) Inconsistent
Q bit setting.
The connection was cleared due to an
inconsistent Q bit found in the packet.
Table C-7 International Problem and Maintenance
Diagnostic
ISO
Description
Explanation
113
(CLEAR)
Remote
network
problem.
The remote network is not operational.
115
(CLEAR)
International
link out of
order.
Connection to the PSN is not currently
available (network not operational).
Table C-5 Call Setup, Call Clearing, or Registration Problem (Continued)