User's Manual

Diagnostic Messages
X.25 Diagnostic Messages
Appendix C 257
69 (CLEAR) Invalid
facility/
registration
length.
Length of the facility field is greater
than the maximum allowed by the
configured revision level of CCITT
X.25 Recommendation (63 for 1980,
109 for 1984). The condition will result
in an error returned to the user
instead of generation of CLEAR if it is
detected in CALL REQUEST.
No combination of facilities can equal
the value indicated in the packet’s
facility length field. If this condition is
detected in the CALL REQUEST
packet it produces an error instead of a
CLEAR.
System could not add negotiation
facilities without the facility field
becoming larger than allowed by the
configured revision level of the CCITT
X.25 Recommendation (63 for 1980,
109 for 1984). This can happen only if
the configured negotiation facility
codes are not present in the facility
field.
70 (CLEAR) Incoming
call barred.
Configuration and status of interface
disallows the opening of new inbound
connection.
71 (CLEAR) No logical
channel
available.
No VC suitable for placing a
connection in READY (P1) state.
Generated when CALL REQUEST
cannot be completed successfully.
ENOSPC was returned to the caller if
condition was detected in synchronous
manner.
The number of internal connections
prohibits new connections being
allocated for CALL INDICATION.
Table C-5 Call Setup, Call Clearing, or Registration Problem (Continued)