User's Manual

Diagnostic Messages
X.25 Diagnostic Messages
Appendix C252
38
(RESTART,
CLEAR,
RESET)
Packet too
short.
Received packet is less than minimum
length. It may be a CALL
INDICATION packet without address
length or facility length fields, CLEAR
or RESET INDICATION without
cause field, or the packet length may
be insufficient to hold address or
facility fields.
39
(RESTART,
CLEAR,
RESET)
Packet too
long.
Received packet exceeds maximum
length. The packet may be larger than
allowed by the configuration and
negotiations (i.e., fast select), or
contain a field (i.e., call/clear user
data) that is larger than the allowed
size.
41
(RESTART,
CLEAR,
RESET)
RESTART or
REGISTRA-
TION packet
with
non-zero
LCI.
RESTART REQUEST sent because
RESTART INDICATION arrived with
logical channel identifier other than 0.
42 (CLEAR) Packet type
not
compatible
with facility.
CALL ACCEPTED or
CONFIRMATION packet received
when CALL INDICATION or
REQUEST had fast select with
restriction on response facility.
43 (RESET) Unauthorize
d interrupt
confirmation.
INTERRUPT CONFIRM packet
received when no matching
INTERRUPT had been sent.
44 (RESET) Unauthorize
d interrupt.
Sequence of two INTERRUPT
INDICATIONs received and system
sent no INTERRUPT
CONFIRMATION packet.
Table C-3 Packet Not Allowed (Continued)