User's Manual

Diagnostic Utilities
x25stat
Chapter 5130
0 receive buffer overflows
0 receive aborts
NOTE T4 under “STASTISTICS FOR LAPB” in the example above is only an
internal parameter; it is not configurable.
The output under the heading “STATISTICS FOR WAN” is explained as
follows:
Example 6: Displaying Virtual Circuit Status
x25stat -v -d x25_0
PER-VC STATISTICS FOR X25
-----------------------------
Table 5-7 Statistics for WAN Output
Output on Screen Description/Meaning
transmit underruns Shows the number of times a
transmission was aborted
because the next octets to be
transmitted were not provided
soon enough for the level 2
firmware
receive overruns Shows often-received octets were
overwritten because they were
not processed by the card
received frames with no
buffer
No message available in level 1 to
copy received data to
received frames with no flow
control
Never used
receive buffer overflows Count of “too long” frames
received
receive aborts Count of frames that have been
aborted