User's Manual

OLA/R Overview and Concepts
How to On-line Replace (OLR) a J3525A or J3526A PCI Card using SAM
Chapter 4 107
How to On-line Replace (OLR) a J3525A or
J3526A PCI Card using SAM
WARNING When performing online replacemant, the stack for all the ports
of the interface card under consideration will be stopped before
repalcement. They will be restarted after the repalcement. Thus
any user application which has open connections will receive
DISCONNECT messages. The connections will have to be
re-established after successful replacement of the interface card.
Step 1. Start SAM.
Step 2. From the SAM Areas screen, select PeripheralDevices.
Step 3. From the PeripheralDevices screen, select Cards.
Step 4. From the I/O Cards screen, view the list of available I/O cards. Select
from the possible entries mentioned below:
• HP J3525A PCI 2-port PSI card
• HP J3526A PCI 4-port PSI card
Step 5. From the Menu bar, select Actions.
Step 6. From the Actions drop-down list, select Replace.
Step 7. SAM now performs a Critical Resource Analysis (CRA). That is, now that
you have selected to Replace a card, SAM’s first step is to confirm that
no critical resources will be disabled when the card is taken off-line.