Operation Manual

a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the access panel.
4. Place the server on its side
5. Open the DIMM slot latches.
6. Install the DIMM.
1
2
2
7. Install the access panel.
8. Return the server to an upright position.
9. Connect the power cord to the server.
10. Connect the power cord to the power source.
11. Power up the server.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website.
Use these instructions to install and enable TPM on a supported server. This procedure includes three
sections:
36 HP Trusted Platform Module option