Operation Manual

Item Description Definition

5 Maximum memory speed 2133 MT/s

6 CAS latency P = 15

7 DIMM type E = UDIMM (unbuffered with ECC)

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the Hewlett Packard Enterprise website.

Memory configuration

Maximum memory capacity

DIMM type DIMM rank One Processor

UDIMM Single-rank (4 GB) 16 GB

UDIMM Single-rank (8 GB) 32 GB

UDIMM Dual-rank (8 GB) 32 GB

UDIMM Dual-rank (16 GB) 64 GB

For the latest memory configuration information, see the product QuickSpecs on the Hewlett Packard

Enterprise website.

General DIMM slot population guidelines

Observe the following guidelines:

• Install DIMMs only if the corresponding processor is installed.

• Black DIMM slots denote the first slot of a channel.

• When only one processor is installed, install DIMMs in the following sequential order: 3C, 1D, 4A, 2B.

• When single-rank, dual-rank DIMMs are populated with two DIMMs per channel, always populate the

higher number rank DIMM first (starting from the farthest slot). For example, first populate the dual-

rank DIMM and then populate the single-rank DIMM.

• DIMMs should be populated starting farthest from the processor on each channel.

For more information about server memory, see the Hewlett Packard Enterprise website.

The DIMM speeds supported in this server are listed in the following table:

Populated slots (per channel) Rank Speeds supported (MT/s)

1 Single, dual 2133

2 Single, dual 2133

Population order

For memory configurations with a single processor, DIMMs must be populated sequentially in the

following order: 3C, 1D, 4A, 2B.

Installing a DIMM

Procedure

1. Power down the server

2. Remove all power:

Memory configuration 35