Operation Manual

12. Install the tower bezel.
13. Install the access panel.
14. Return the server to an upright position.
15. Connect each power cord to the server.
16. Connect each power cord to the power source.
17. Power up the server.
Memory options
The memory subsystem in this server supports UDIMMs only.
The server supports the single-rank and dual-rank PC4-2133 (DDR4-2133) UDIMMs operating at up to
2133 MT/s DIMM speeds.
Supported DIMM specifications
Type Rank Capacity Native speed Voltage
UDIMM Single 4 GB 2133 MT/s STD
UDIMM Single 8 GB 2133 MT/s STD
UDIMM Dual 8 GB 2133 MT/s STD
UDIMM Dual 16 GB 2133 MT/s STD
Populated DIMM speed (MT/s)
Type Rank 1 DIMM per channel 2 DIMMs per channel
UDIMM Single 2133 MT/s 2133 MT/s
UDIMM Dual 2133 MT/s 2133 MT/s
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website.
Memory subsystem architecture
The memory subsystem in this server is divided into channels. The processor supports two channels, and
each channel supports two DIMM slots, as shown in the following table:
Memory options 33