Operation Manual

8. Close the expansion slot cover retainer.
9. Install the access panel.
10. Connect the adapter to a storage product with external mini-SAS cables.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server.
Slim optical disk drive enablement option
Procedure
1. Power down the server
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the access panel.
4. Remove the tower bezel.
Slim optical disk drive enablement option 29