Operation Manual

10. Install the tower bezel.
11. Install the access panel.
12. Return the server to an upright position.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server.
Controller options
The server ships with an embedded Intel Rapid Storage Technology SATA RAID Controller. To obtain the
SATA driver required for RAID configuration, download from the Hewlett Packard Enterprise website.
For more information about the controller and its features, see Support for Intel Rapid Storage
Technology on the Intel website.
To configure arrays, see Setting Up and Configuring Intel AMT and RAID volumes on ProLiant ML10
Gen9 Server on the Hewlett Packard Enterprise website.
Installing an HPE H241 host bus adapter
IMPORTANT:
For additional installation and configuration information, see the documentation that ships with the
option.
An HPE H241 host bus adapter can only be installed in slot 1 and 2.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the access panel.
4. Remove the expansion slot cover retainer.
Controller options 27