Operation Manual

To install an operating system on the server, create installation media on an optical disk or on USB
media. Insert the optical drive into a USB-attached optical drive (user provided) or insert the USB device
and reboot the server.
Before using your server for the first time, verify that you have the latest drivers, firmware, and system
software installed, unless any installed software or components require an older version. Download
individual drivers, firmware or other system software from the Hewlett Packard Enterprise website.
Powering on and selecting boot options in UEFI Mode
This server operates in UEFI mode by default. On servers operating in UEFI Mode, the boot controller
and boot order are set automatically.
Procedure
1. Press the Power On/Standby button.
2. During the initial boot:
• To modify the server configuration ROM default settings, press the <Delete> or <ESC> key on your
keyboard when you see the text Press DEL to run Setup prompt to enter the BIOS setup utility.
The BIOS setup utility is available in the English language only.
• Enter the Boot settings screen to change the boot order, and override the default boot order
settings in the Save and Exit screen.
Registering the server
To experience quicker service and more efficient support, register the product at the Hewlett Packard
Enterprise Product Registration website.
Powering on and selecting boot options in UEFI Mode 19