Specifications
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Specifications
- Setup Utility (BIOS)
- Backup and recovery
- Power cord set requirements
- Recycling
- Index
Remove the system board:
1. Disconnect the optical drive connector from the system board (1) .
2. Remove the Phillips 5.0×2.0 screw (2) that secures the system board to the base enclosure.
3. Lift the system board (3) from the right edge and pull it away from the base enclosure at an
angle.
For AMD computer models, see the following image.
For Intel computer models, see the following image.
72 Chapter 4 Removal and replacement procedures