Installation manual

FuelMaster
®
Installation Manual
14
• NIST Handbook 44, Specifications, Tolerances, and Other Technical Requirements for
Weighing and Measuring Devices, technical requirements for the purpose of eliminating from
use weights and measures and weighing and measuring devices that give readings that are
false, that are of such construction that they are faulty, or that facilitate the perpetration of fraud.
Section 3 contains most of the guidelines for retail self service fuel site inspection criteria.
Knowledge of this reference is necessary when performing an installation in support of retail
fuel sales.
Safety Guidelines: Use the following guidelines to help protect your FMU from potential
damage and ensure your own personal safety.
WARNING
Do not operate your FMU with any cover removed or door open.
AVERTISSEMENT
N'actionnez pas votre FMU quand aucune couverture est déplacée ou aucune porte est ouverte.
CAUTION
Do not open your FMU’s doors during wet weather.
ATTENTION
N'ouvrez pas les portes de Votre FMU par le temps de pluie.
As you use your FMU, observe the following safety guidelines:
• To help avoid damaging your FMU, be sure the AC power available at your location is 110 volts,
60 hertz (Hz).
• To help prevent electrical shock, connect the FMU into properly grounded sources.
• To help avoid possible damage to the FMU and or other interfacing equipment, wait 5 seconds
after turning off all interfacing equipment before disconnecting any interconnecting cables.
• To help protect your FMU from sudden, transient electrical increases, your FMU is equipped
with Surge Protection. All equipment interfacing your FMU needs to use a surge suppressor,
line conditioner, or un-interruptible power supply (UPS).
• Be sure nothing rests on your FMU’s cables and that the cables are not located where they can
be stepped on or tripped over.
• Do not spill food or liquids on your FMU or interfacing equipment.
• Do not push any objects into the openings of your FMU. Doing so can cause fire or electrical
shock by shorting-out internal components.
• Keep your FMU away from radiators and heat sources.
WARNING
Do not attempt to service the FMU yourself, except as explained in this manual. Always follow
installation and service instructions closely.
AVERTISSEMENT
N'essayez pas d'entretenir le FMU vous-même, excepté comme expliqué en ce manuel. Suivez
toujours les instructions d'installation et de maintenance précisément.
Before you open the door or remove any FMU covers, perform the following steps in the sequence
indicated:
• Turn off/unplug your FMU and any devices. Certain system board components continue to
receive power anytime the FMU is connected to AC power.
• Disconnect your FMU and devices from their sources. Also disconnect any telephone or
telecommunication lines from the FMU to reduce the potential for personal injury or shock.
190