Installation manual

FuelMaster
®
Installation Manual
12
Section 2 - System Description
This section contains a description of all FuelMaster
®
standard and optional equipment
available at the time of publication of this manual.
Section 3 – Site Planning and Preparation
This section provides guidelines for preparing your site for a FuelMaster
®
installation.
Section 4 - Installation
This section provides guidelines for performing a FuelMaster
®
FMU and EIU installation.
Section 5 - Initialization
This section contains procedures for performing the post-installation inspections and tests,
and completing the final certification jointly with the customer to validate the system
warranty.
Appendix A – Glossary
An explanation of terms, abbreviations, and acronyms used in this manual.
Appendix B – Dispenser Compatibility Listing
A listing of known dispenser makes and models and how they interface with FuelMaster
®
.
Appendix C – FMU & EIU Configurations
A description of the various model numbers and configurations of Fuel Management Units
(FMUs) and Equipment Interface Units (EIUs).
Appendix D – Laptop Direct Connect To FMU
Instructions for direct connecting to an FMU with a laptop, to view or change FMU
programming information.
Appendix E – Retail Applications
Instructions for applying FuelMaster
®
to the special needs of small airports and marinas, and
other retail applications.
Appendix F – Wiring Differences for Canadian and European Certified FMUs
Explanation of differences between U.S. and Canadian and European certified FMUs
Appendix G – FMU Wire and Cable Connection Points
Listing of connection points for an unknown FMU wire or cable.
Appendix H - Electronic Dispenser Interface
Instructions for using FuelMaster
®
with electronic dispensers (to be supplied at a later date).
Appendix I – Programming Credit Card Units
Instructions for programming units to accept various credit cards (to be supplied at a later
date).
188