Installation manual

FuelMaster

Installation Manual

• User Keys are encoded with a user identification number and are assigned to a user

• Supervisor Keys are authorized special access to reconfigure the FMU, run built-in tests of the

FMU, issue fuel to operators without a Prokee®, and enter inventory-tracking information.

• Manual Issue Keys are used to issue fuel to individuals or vehicles that do not have a

Prokee

• Lube Truck Keys are used to fill the storage tank of a mobile fueling truck at a dispenser

connected to an FMU, and to configure the operating parameters of a Mobile FMU. A Lube

Truck Key effects a transfer of fuel from a fixed fueling site to a mobile fueling site.

• AIM2™ Programmer Keys are Supervisor Keys with all functions except AIM2™ programming

functions removed.

Smartcards

Smartcards are a credit card sized plastic card with a read/write memory chip embedded in its

face. The read/write memory chip stores the same information and functions as a Prokee

. Any

Prokee

application may be applied to Smartcards.

A separate encoder is needed to encode Smartcards, and a separate reader must be installed in

the FMU to read Smartcards.

Fuel Management Software

The Fuel Management Software is loaded in a personal computer to build an operating program

for control of the FMUs. The operating program can be setup in four basic configurations:

Verifiable Miscellaneous Number (VMN), Verifiable Vehicle Identifier (VVI), Commercial (COM), or

Keyless.

• The VMN version utilizes Vehicle Keys, and rejects the input of an incorrect user identification

number.

• The VVI version utilizes User Keys, and rejects the input of an incorrect vehicle identification

number.

• The COM version utilizes Vehicle and/or User Keys and records the input of a vehicle and/or

user identification number, but does not refuse the transaction if the number entered is

incorrect.

• The Keyless option provides for starting transactions at the FMU without the need of any access

device such as a Prokee

, smartcard, or mag-stripe card. Keypad entries alone initiate fueling

transactions.

A database containing site, user, vehicle, customer, and transaction information is built as the

program is set up and operated. Multiple copies of the FuelMaster

software may be loaded on

networked computers sharing a common database.

Central Controller

The Central Controller is the personal computer used to run the Fuel Management Software. The

Central Controller communicates with the Master FMU to download transaction data, upload

authorizations, or to change FMU configuration. Refer to the FMPlus User Guide for minimum PC

requirements and detailed operating instructions.

205