Installation manual

FuelMaster
®
Installation Manual
24
Commercially Available Products
This FuelMaster
®
Installation Manual makes reference to commercially available equipment and materials
that are required to complete an installation. Trade names and part numbers are also referenced to cite
products that have been tested and known to be serviceable with FuelMaster
®
equipment. These references
should not be construed as restrictions only to those referenced products. There may be other products
which have not yet been tested, but may be equally suitable.
Syn-Tech Systems inventories commercially available products necessary to complete a FuelMaster
®
installation. When these products are purchased from Syn-Tech Systems, the manufacturer’s warranty is
honored and administered by Syn-Tech Systems.
Support
Syn-Tech Systems strives to provide the best customer and distributor support possible. Free on-site
distributor and customer training is provided quarterly (or more often as needed) at the Fuelmaster
®
factory in
Tallahassee, Florida. Training at the distributor’s location is available where it may be more cost effective to
send a trainer(s) from Syn-Tech rather than send several technicians to Tallahassee for factory training.
Webinars are available through the internet for training sessions between a Syn-Tech trainer in Tallahassee,
Florida, and customer representative(s) anywhere there is internet access. See the FuelMaster
®
website at
http://www.syntech-fuelmaster.com/ for assistance scheduling training.
Syn-Tech offers a well staffed Customer Satisfaction Center (CSC) to take questions and calls from
FuelMaster
®
customers. In addition, a Distributor Support Center provides answers from experienced field
technicians for distributors needing installation, startup, training, or troubleshooting assistance. Questions for
the CSC should be called in to 800-888-9136, ext. 1500, or e-mailed to [e-mail]
.
Syn-Tech maintains an e-mail database of all FuelMaster
®
distributors. Whenever a new publication or other
pertinent information is published it is forwarded to all distributors on the mailing list. If your e-mail address
changes, or other e-mail addresses are added, forward the new address to distributor_replies@syntech-
fuelmaster.com.
Improvements
Recommendations for improvement or corrections to this manual may be reported to Syn-Tech's Customer
Satisfaction Center at [e-mail] or by mailing to:
SYN-TECH SYSTEMS, INC.
Attn: Customer Satisfaction Center
P.O. Box 5258
Tallahassee, FL 32314
200