Installation manual

FuelMaster
®
Installation Manual
145
3. Press Esc to exit. A display similar to the following should appear:
CONFIGURATION HAS CHANGED!
WOULD YOU LIKE TO SAVE IT ? (Y/N)
4. Press Y to save the configuration change. The following prompt will appear:
SAVING SYSTEM CONFIGURATION…
CONFIGURATION RECORDED.
Receipts Print on Power UP: if the FMU resets during a power failure, and it reverts to UPS
power, a firmware option must be turned on to ensure the FMU prints a receipt for the customer. This is
only necessary when the FMU resets after reverting to UPS power. In most instances the FMU will not
reset, and the option need not be enabled.
Perform the following for receipts to print on power up:
1. Type a 5b command, and press Enter. A display similar to the following should appear:
CURRENT RECEIPT PRINTER CONFIGURATION
----------------------------------------------------------------------
A. RECEIPT PRINTER : DISABLED
B. RCPTS PRINT ON PWR UP : DISABLED
C. RECEIPT ALWAYS : DISABLED
D. RECEIPT PRINTER TYPE : PEDESTAL
E. PEDESTAL RCPT PAPER CUT : FULL
F. RECEIPT PRINTER BAUDRATE : 2400
G. PRINT DOLLAR FOR PROKEE RECEIPTS : DISABLED
H. PRINT DUPLICATE RECEIPTS : DISABLED
I. PRINT RECEIPT DATE/TIME STAMP : ENABLED
J. PRINT MASTER PRODUCT DESCRIPTION: DISABLED
K. PRINT RECEIPTS FOR AIM : DISABLED
L. PROMPT FOR AIM RECEIPTS : DISABLED
M. ALLOW $0.00 FOR PROKEE PRICING : ENABLED
N. RESTORE DEFAULT VALUES
USAGE - <LETTER>=CHANGE VALUE, <ESC>=EXIT
2. Press B. RECPTS PRINT ON PWR UP : DISABLED should reset to RECPTS PRINT ON PWR UP :
ENABLED.
3. Press Esc to exit. A display similar to the following should appear:
CONFIGURATION HAS CHANGED!
WOULD YOU LIKE TO SAVE IT ? (Y/N)
4. Press Y to save the configuration change. A display similar to the following should appear:
SAVING SYSTEM CONFIGURATION…
CONFIGURATION RECORDED.
321