Installation manual

FuelMaster
®
Installation Manual
144
J. PRINT MASTER PRODUCT DESCRIPTION: DISABLED
K. PRINT RECEIPTS FOR AIM : DISABLED
L. PROMPT FOR AIM RECEIPTS : DISABLED
M. ALLOW $0.00 FOR PROKEE PRICING : ENABLED
N. RESTORE DEFAULT VALUES
USAGE - <LETTER>=CHANGE VALUE, <ESC>=EXIT
2. Press G. PRINT DOLLAR FOR PROKEE RECEIPTS: DISABLED should change to PRINT
DOLLAR FOR PROKEE RECEIPTS: ENABLED.
3. Press Esc to exit. A display similar to the following should appear:
CONFIGURATION HAS CHANGED!
WOULD YOU LIKE TO SAVE IT ? (Y/N)
4. Press Y to save the configuration change. A display similar to the following should appear:
SAVING SYSTEM CONFIGURATION…
CONFIGURATION RECORDED.
Display Pump Pricing: the FMU may be configured to display to the user the unit price of each
product offered at the FMU. Once configured, “A” as a hot key may be depressed to show the unit price
of the first product offered. Depressing “A” again will show the price of the second product, and so on for
each additional product.
Perform the following to display pump pricing:
1. Type a 59 command and press Enter. A display similar to the following should appear:
CURRENT SYSTEM OPTIONS (MENU 1) CONFIGURATION
-----------------------------------------------------------------------------------
A. SYSTEM INPUT TYPE : VMN - VEH. KEY
B. CUSTOM SYSTEM OPTION : DISABLED
C. ENTERED VEHICLE IDs ARE : ALPHANUMERIC
D. SEMI MANUAL MODE : DISABLED
E. REAL GATE TXN : DISABLED
F. POWER FAIL CHECK : ENABLED
G. ENTERED USER IDs ARE : ALPHANUMERIC
H. FURNACE LOGGING : DISABLED
I. USING OLD PROKEES : DISABLED
J. SHOW PROKEE/SMARTCARD ID : DISABLED
K. CONFIRM PROKEE/SMARTCARD ID : DISABLED
L. DISPLAY PUMP PRICING : DISABLED
M. EIU PROKEE/SMARTCARD WHICH KEYS : NO KEYS!!!
N. TWO RELAYS PER PUMP : DISABLED
O. AUTO ACTIVATE SINGLE PUMP : DISABLED
P. MODEM CONNECT UPPER SPEED LIMIT : MAXIMUM
Q. RESTORE DEFAULT VALUES
USAGE - <LETTER>=CHANGE VALUE, <ESC>=EXIT
2. Depress L. DISPLAY PUMP PRICING :DISABLED should reset to DISPLAY PUMP PRICING
:ENABLED.
320