Installation manual

FuelMaster
®
Installation Manual
19
ID Plates
An ID plate (see Figure 1-3) is affixed to the side of the FMU pedestal closest to the pedestal door locks.
The ID plate contains the serial number of the unit as well as certification information, and a code to
cross reference the key number used in the door locks (see Table 1-1). If a pedestal is replaced due to
an upgrade or damage, the new pedestal will not have an ID plate installed. Remove the ID plate from
the older unit and install it on the newer unit using pop-rivets. Pop-rivets 1/8 inch wide x 1/4 inch long
should be used to secure the ID plates to the pedestal.
The ID plate is affixed to the FMU pedestal. The FMU is shipped in two pieces, in two separate shipping
containers. The upper cabinet has no ID plate linking it to the pedestal. Pedestals and upper cabinets
are built and tested as a single unit. Attention must be given to the markings on shipping containers to
ensure pedestals and upper cabinets are matched when installed.
WARNINGS
, CAUTIONS and NOTES
This manual emphasizes special operations with Warnings, Cautions, or Notes preceding the applicable
procedure:
• A WARNING
indicates a safety precaution that, if not followed, could result in personal injury;
• A CAUTION indicates a safety precaution that, if not followed, could result in damage to
equipment; and,
• A NOTE indicates a procedure requiring special emphasis for the proper installation and
operation of FuelMaster
®
equipment.
Warnings and Cautions in this manual are provided in both English and French to meet the needs of our
French speaking customers in Canada.
Basic FuelMaster
®
FMU Warranty
The basic warranty for each FuelMaster
®
FMU provides coverage for parts and telephonic labor for
a period of one year from date of start-up or fifteen months from date of shipment, whichever occurs
Key Number ID Plate Code
300 0
325 1
350 2
375 3
400 4
425 5
450 6
475 7
500 8
523 9
333 10
Table 1-1. FMU Door Key Reference
195