Installation manual

FuelMaster
®
Installation Manual
135
A1,ARG1,ARG2 List 284 saved LCD prompts/list ARG2 prompt(s) start at
ARG1.
A2,ARG1,ARG2 List saved LCD prompts from ARG1 through ARG2.
A3,ARG1 Second Verified List Operations.
A4,ARG1 Vehicle Key/ID List Operations.
A5,ARG1 User Key/ID List Operations.
AA Modem pass-thru (Ctrl-Z to exit).
AB Advanced Modem Pass-thru (Ctrl-Z to exit).
AF Remote Command Menu.
B4,ARG1,ARG2 Command Line Zmodem.
B5,ARG1,ARG2 Command Line Xmodem.
B9 AIM2 Display current operation stats.
BA Current access point configuration.
BB AIM2 Display Message Info (like from console port).
BC AIM2 Pass-Thru.
C0 RTXCBUG (doesn't block tasks).
C1 Display current siglist[].
C2 Display saved siglist[].
C3 Display saved semat[].
C5 Display saved TASK info.
C6 Display saved QUEUE info.
C7 Display some saved variables.
CA MOBILE download command.
CC,ARG1,ARG2,ARG3 Credit Card operations menu.
CD,ARG1 CC Captured Batch Report operations.
DB,ARG1,ARG2,ARG3 FMU Data Log Interface.
DC Check RAM Battery status.
DE,ARG1 Copy Last Transaction onto end of Archive (ARG1=count).
DF,ARG1 Fill Transaction Array (ARG1=count).
E5,ARG1 Bring Master ON or OFF LINE, ARG1 0=OFF/1=ON LINE.
E6,ARG1,ARG2 Bring SAT ON or OFF LINE, ARG1=SAT#, ARG2 0=OFFLINE
1=ONLINE.
E7 Take the site OFFLINE.
E8 Bring site ONLINE.
E9 Display the current site status.
EA Download new FMU code, but do not write it, just download
it.
EB Prompt And Update Code From Ram, after sending FMU new
code.
EC Current SAT update progress.
ED Check Status of all SAT units, for code updating.
EE Display SAT FMU version information.
EF Display Update Menu for SAT units.
F1,ARG1 Networking Menu (ARG1: FF = Set new MAC Address).
F2 Generate FTP Session.
F3 Download transactions to a file.
F4 Ping.
F5,ARG1 Copy image file to update memory.
F6 Program MIB with 'KEYPAD.HEX' (must be uploaded already).
F7 Get version info from MIB.
F8 Main board CPLD version.
FB Download Memory Menu.
FC Reset FMU.
FD Release Configuration Lock.
FE Clear FMU's transaction memory.
FF Clear all FMU variables and initialize unit.
311