Installation manual

FuelMaster
®
Installation Manual
133
1C Send message to LCD, wait for user response, or 45 sec..
1D,ARG1,ARG2 Same as 1F, also include out of range but don't rollover.
1E,ARG1,ARG2 List ARG2 transactions (in HEX) starting from tx. #ARG1.
1F,ARG1,ARG2 List ARG2 transactions (decoded) starting from tx. #ARG1.
20,ARG1 Send config to CC {ARG1=0, Master | ARG1=1-8, Satellite}.
21,ARG1 Get config from CC {ARG1=0, Master | ARG1=1-8, Satellite}.
22 Set FMU's main prompt message.
23 Reset main prompt message.
26 Display number of satellites (output is binary data).
27,ARG1 Get Pricing From CC {ARG1=0, Master | ARG1=1-8, Satellite}.
28 Mark FMU transactions as downloaded.
29 Display system time (computer format).
2A Display system time/date.
2B Set location name (like site name).
2C,ARG1 Display Config Audit Trail.
2D Initialize Config Audit Trail.
2F,ARG1 Trnsxn Num Operations: ARG1=1 disp, ARG1=2 set, ARG1=3
reset.
30 Store clock time.
31 Store clock date.
33,ARG1 Modify ARG1 transaction (#-decimal).
34,ARG1,ARG2,ARG3 Modify ARG3 number of bytes starting at ARG1 mem loc to
ARG2.
35 List FMU's verified transactions.
36,ARG1 List the count of FMU's verified transactions.
37 Reset hose totals.
38 Set site signature.
39 Write configuration to RTC RAM.
3A Set pump cumulative totalizers.
3B Set Product Prices.
3C Clear pump cumulative totalizers.
3D Setup PIC EIU configuration.
3E Reset PIC EIU configuration to default.
3F Display PIC EIU configuration.
40 List memory addresses.
41,ARG1 Pass through to satellite FMU number ARG1.
42 Set custom miscellaneous prompt.
43 Reset miscellaneous prompt back to default.
44 Set receipt header message.
45 Reset receipt header message to default.
46 Set receipt footer message.
47 Reset receipt footer message to default.
48 Set custom vehicle prompt.
49 Reset vehicle prompt back to default.
4A,ARG1 Reset OIL ASK prompt, 1=ConnDOT, other=default.
4B Set custom Odometer prompt.
4C Reset Odometer prompt back to default.
4D Set custom Agency prompt.
4E Reset Agency prompt back to default.
50,ARG1 Shut down hose number ARG1 (Hex) ARG1=0, all pumps.
51,ARG1 Re-enable hose number ARG1 (Hex) ARG1=0, all pumps.
52,ARG1 Put hose ARG1 (Hex) into semi-manual mode ARG1=0, all
pumps.
53,ARG1 Take hose ARG1 (Hex) out of semi-manual ARG1=0, all pumps.
54 Moniter Mode and Semi-Manul Mode Configuration Menu.
56 Set Prokee Tax Rates.
57 Set High Flow Setpoint (for 2 relays per hose).
309