Specifications

Display assembly
NOTE: The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables.
Description Spare part number
35.6 cm (14.0 in), HD, LED, SVA, BrightView display assembly
●
Bright purple (modern mesh pattern) 683844-001
●
Linen white (butterfly blossom pattern) 689462-001
● Linen white (modern mesh pattern) 684473-001
●
Ruby red (modern mesh pattern) 683845-001
●
Sparkling black 683847-001
● Winter blue (modern mesh pattern) 683846-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 34).
5. Remove the service door (see
Service door on page 35).
6. Remove the optical drive (see
Optical drive on page 36).
7. Remove the hard drive (see
Hard drive on page 39).
8. Remove the keyboard (see
Keyboard on page 46).
9. Remove the top cover (see
Top cover on page 49).
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
Component replacement procedures 57