Datasheet
Table Of Contents
- Overview
- Supported Components
- System Technical Specifications
- Stable & Consistent Offerings
- Technical Specifications - Processors
- Technical Specifications - Hard Drives
- Technical Specifications - Hard Drive Controllers
- Technical Specifications - Graphics
- Technical Specifications - Multimedia and Audio Devices
- Technical Specifications - Optical and Removable Storage
- Technical Specifications - Controller Cards
- Technical Specifications - Networking and Communications
8GB (2x4GB) DDR3-1333 ECC Registered RAM 2-CPU
Both processor
sockets must be
populated.
16GB (4x4GB) DDR3-1333 ECC Registered RAM 2-CPU
Both processor
sockets must be
populated.
24GB (6x4GB) DDR3-1333 ECC Registered RAM 2-CPU
Both processor
sockets must be
populated.
32GB (4x8GB) DDR3-1333 ECC Registered RAM 2-CPU
Both processor
sockets must be
populated.
48GB (6x8GB) DDR3-1333 ECC Registered RAM 2-CPU
Both processor
sockets must be
populated.
Sub-Section Description/Notes
Sub-Section Description/NotesSub-Section Description/Notes
Sub-Section Description/Notes
The Z600 has a three-channel memory architecture. Three channels are associated with each processor.
For optimal performance, populate a DIMM in each channel.
AMO
AMOAMO
AMO
PC3-10600 DDR3-1333 ECC Unbuffered DIMMs AMO
PC3-10600 DDR3-1333 ECC Unbuffered DIMMs AMOPC3-10600 DDR3-1333 ECC Unbuffered DIMMs AMO
PC3-10600 DDR3-1333 ECC Unbuffered DIMMs AMO
1GB (1x1GB) DDR3-1333 ECC Unbuffered RAM
FX698AA
2GB (1x2GB) DDR3-1333 ECC Unbuffered RAM
FX699AA
4GB (1x4GB) DDR3-1333 ECC Unbuffered RAM
NL797AA
PC3-10600 DDR3-1333 ECC Registered DIMMs AMO
PC3-10600 DDR3-1333 ECC Registered DIMMs AMOPC3-10600 DDR3-1333 ECC Registered DIMMs AMO
PC3-10600 DDR3-1333 ECC Registered DIMMs AMO
8GB (1x8GB) DDR3-1333 ECC Registered RAM
FX622AA
4GB (1x4GB) DDR3-1333 ECC Registered RAM
FX621AA
NOTE:
NOTE:NOTE:
NOTE:
Although all of these memory configurations incorporate 1333MHz memory modules, the speed
at which they operate is dependent upon the processor.
Support for Registered DIMMs on the Z600 requires a systemboard with the C2 revision of the Intel
5520 chipset. Two methods are available to determine if a specific Z600 system has the C2 revision of
the chipset. 1. Use the BIOS setup menu to access the "Boot Block Date" from the "System Information
Menu". All B3-based systems will have a "1/30/09" date and C2-based systems will have a "01/07/10"
date. 2. HP Performance Advisor SW can be used to determine the PCA ID, which is reported by
Performance Advisor under "System Configuration" and "Baseboard ID". All B3-based systems will have
the ID "0AE8h" and all C2-based systems will have the ID "0B54h".
QuickSpecs
HP Z600 Workstation
HP Z600 WorkstationHP Z600 Workstation
HP Z600 Workstation
Supported Components
DA - 13277 Canada — Version 36 — August 1, 2011
Page 11