Recovering Jets On ColorSpan Legacy UV-Cure Printers 1
Preventing Jet Problems The piezo printhead technology used in ColorSpan Legacy UV-Cure printers is robust and long-lived when properly maintained. The nature of UV-curable ink, however, does mean that individual jets on a printhead that stop working may be difficult or impossible to recover. To avoid this situation, be sure to always follow these guidelines: 1. Clean the printheads daily.
Perform a Performance Air Purge The Performance Air Purge is found in the Maintenance menu. The Performance purge uses more air pressure to force a larger quantity of ink through the printheads. Consult the printer’s User Manual for detailed information the Purge. In summary, the steps include: 1. Select “Menu -> Maintenance -> Air Purge”, then select Performance Purge. 2. The carriage will move to the left to allow you to open the wiping station cover.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
