HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook PC Compaq 15 TouchSmart Notebook PC HP 250 G2 Notebook PC HP 255 G2 Notebook PC Maintenance and Service Guide

If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display bezel:
a. Remove the two Mylar screw covers (1) and the two Phillips PM2.5×4.5 screws (2) that secure the
display bezel to the display assembly. The Mylar screw covers are included in the Rubber Kit, spare
part number 747133-001 for HP 15 and Compaq 15 models, 756215-001 for HP 250 models, and
751418-001 for HP 255 models.
NOTE: In this procedure, the display will NOT be connected to the computer, as shown in the
following image.
b. Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the
display bezel until the bezel disengages from the display enclosure.
74 Chapter 4 Removal and replacement procedures