HP x360 310 G1 PC - Maintenance and Service Guide

Bottom cover
Description Spare part number
Bottom cover for use in:
Red models with a 3 cell battery 784782-001
Red models with a 2 cell battery 755725-001
Silver models with a 3 cell battery 790944-001
Silver models with a 2 cell battery 755726-001
Rubber Kit (includes rear feet) 755736-001
Before removing the bottom cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the bottom cover:
1. Position the computer upside-down.
2. Pry the two rear rubber feet off the bottom cover (1).
3. Remove the two Phillips PM2.5×8.0 screws (2) that secure the bottom cover to the computer.
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts