Using System Center 2012 R2 Configuration Manager SP1 to Manage Windows-based HP Thin Clients

27
Note:
After the task sequence finishes successfully, the write filter status is disabled by default.
Post-deployment tasks
The deployed image might require more customization. For example, the previous procedures do not configure the write
filter status, domain membership, and Auto Logon options.
It is recommended to customize these options by running command lines or scripts at first boot. For more information on
enabling the write filter and an example script, see Appendix B—Enabling the write filter using a deployment task sequence
.
Note:
After a Windows Embedded Standard 7P image is deployed, the system does not start automatically until the settings, such
as time zone and region, have been configured from the client side.
Modifying an existing operating system deployment task
Downloading and extracting the manageability driver pack
1. Download the driver pack for the appropriate thin client model from http://www.hp.com/go/bizsupport (search for the
thin client model, and then select drivers, software & firmware).
2. Run the driver package, and specify the location to extract the files to.
Note:
By default, this driver package extracts to c:/swsetup.
When complete, the extracted contents are as follows: