HP ThinPro 4.4 Administrator Guide

NOTE: The language can also be set by configuring Dynamic Host Configuration Protocol (DHCP)
tag 192 as a string whose value is English, German, Spanish, French, Japanese, or Simplified
Chinese.
Network
To configure network settings:
1. In the HP ThinPro Control Panel, double-click Network.
2. Configure the Wired tab:
a. Enable IPv6—Enables the IPv6 connection. The default is IPv4.
b. Ethernet Speed—List of Link speed/Duplex mode pairings available.
c. Connection Method—Option to use Auto or Static connection
d. Static Address Configuration—Enable IPv6 NOT enabled
●
IP Address
●
Subnet Mask
●
Default Gateway
e. Static Address Configuration—Enable IPv6 enabled
●
IPv6 Address
●
Subnet Prefix Length
●
Default Gateway
f. Security Settings
Authentication
●
TTLS
◦
Inner Authentication—Further authentication layer
◦
CA Certificate—Location of security certificate
◦
Anonymous Identity—Any temporary name (Optional)
◦
Username—User's username
◦
Password—User's password
●
PEAP
◦
Inner Authentication—Further authentication layer
◦
PEAP Version—Version of PEAP to be used
◦
CA Certificate—Location of security certificate
◦
Anonymous Identity— Any temporary name (Optional)
◦
Username—User's username
◦
Password—User's password
●
TLS
Setup 39