HP ThinPro 4.4 Administrator Guide

Table 3-24 HP TeemTalk options (continued)
Option Description
Start session connected Starts the session connected.
Show Status Bar Displays the status bar for this connection.
Table 3-25 HP TeemTalk preferences
Option Description
Show Configuration Bar Displays the Configuration Bar.
Save Current Window Position
Saves current window's size and position when you click Save Preferences. It
will be restored on the next system launch.
NOTE: Click Save Preferences each time you change the window size or
position to save the new values.
Run in Full Screen Mode
Select to make the window full screen and remove the frame, soft buttons,
menu, and configuration bars.
NOTE: This option does not become effective until the next system launch
and overrides the Show Configuration Bar and Save Current Window Position
options.
Browser Command
In the box, type the command that runs your web browser, such as:
/ display html links Firefox
Command Line Start Up Options
Use to specify an alternate location for the startup options.
NOTE: For specific information on HP TeemTalk Command Line Startup
Options, see the
HP TeemTalk Terminal Emulator User Guide .
6. Click Next to continue.
7. Set the appropriate finalization options:
Table 3-26 HP TeemTalk finalization options
Option Description
Create an icon on the desktop Creates a desktop icon for this connection.
Summary Session Information Displays a summary of the session that is to be created.
8. Click Finish to save your settings and close the wizard.
Adding an HP TeemTalk connection manually
1. Click Connections > Add.
2. Select HP TeemTalk and set the appropriate configuration options:
Table 3-27 HP TeemTalk manual connection configuration settings
Option Description
Name The connection name.
System beep Enables the system beep sound.
18 Chapter 3 Connections