HP ThinPro 4.4 Administrator Guide

5. When completed, click Next.
6. In the Advanced dialog box, select the appropriate options:
Table 3-14 Citrix connection advanced configurations
Option Description
Fallback connection
Select a fallback connection. HP ThinPro attempts to start a fallback
connection when the original connection does not start.
Autostart priority
Determines the connection startup order. 0 means the connection is disabled.
The other values determine the startup order. Valid options are: 0, 1, 2, 3, 4,
and 5.
Wait for Network before connecting
Disable this option if your connection does not need the network to start or if
you do not want to wait for the network to start the connection.
Show icon on desktop Creates a desktop icon for this connection.
7. Click Finish to save your settings and close the wizard.
NOTE: To enable Citrix USB redirection, use the USB Manager utility. See Redirecting USB
devices on page 36 for instructions.
RDP
Microsoft Remote Desktop Protocol (RDP) enables Windows-based applications to communicate
over network connections. It is installed on all versions of Windows later than Windows NT.
RDP client connections
The RDP client is based on FreeRDP 1.0 and meets the following requirements for RDP 7.1:
●
Hardware-accelerated RemoteFX
●
MMR supported when connecting to Windows hosts with the Desktop Experience feature
enabled (Windows 7 or Windows Server 2008 R2)
●
USBR supported when connecting to Windows 7 Remote Desktop Virtual Hosts
●
Bidirectional audio
●
True multi-monitor support
Creating an RDP7 connection
1. In the HP ThinPro desktop, select Connections and then click Add.
2. Under Add, choose RDP7.
3. In the Connections dialog box, under Network, set the appropriate network connection options
as described in the following table.
Table 3-15 RDP network connection options
Option Description
Name Type a name for this network connection.
Address Type the IP address for this network connection.
Port Under Port, do one of the following:
Add 13