HP Smart Zero Core 4.4 Administrator Guide

Table C-7 root > Display (continued)
Registry key Description
profiles settings are discarded. This key should not need to
be modified.
root > Network
This section describes the registry keys, functions, options, and descriptions in the root > Network
folder.
Table C-8 root > Network
Registry key Description
root/Network/ActiveDirectory/Domain Active Directory domain.
root/Network/ActiveDirectory/DynamicDNS Enable dynamic DNS.
root/Network/ActiveDirectory/Enabled Enables Active Directory.
root/Network/ActiveDirectory/Method Method used to provide user credentials.
root/Network/ActiveDirectory/Password Active Directory domain user password, only valid in static
method.
root/Network/ActiveDirectory/Username Active Directory domain username, only valid in static
method.
root/Network/DNSServers Additional DNS servers for Domain Name resolution can be
specified here. The specified servers will be used in addition
to any servers retrieved through DHCP. Up to five IPv4 or
IPv6 addresses may be specified, separated by commas.
root/Network/FtpProxy FTP proxy address.
root/Network/Hostname Hostname of the client.
root/Network/HttpProxy HTTP proxy address.
root/Network/HttpsProxy HTTPS proxy address.
root/Network/IPSec/IPSecRules/{UUID}/DstAddr Destination address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/MMAuthMethod Authentication method for the IPsec rule. Enter PSK to use a
pre-shared key and Certificate to use certificate files.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodCACert
When the authentication method is ‘Certificate’, the CA
certificate file's path is saved in this key.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodClientCert
When the authentication method is 'Certificate', the client
certificate file's path is saved in this key.
root/Network/IPSec/IPSecRules/{UUID} /
MMAuthMethodPresharedKey
When the authentication method is 'PSK', the pre-shared key
value is saved in this key.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodPrivateKey
When the authentication method is 'Certificate', the client
certificate file's corresponding private key file path is saved in
this key.
root/Network/IPSec/IPSecRules/{UUID}/MMDHGroup Phase 1 Diffie-Hellman group.
root/Network/IPSec/IPSecRules/{UUID}/MMEncryptionAlg Phase 1 encryption algorithm.
86 Appendix C HP Smart Zero Core registry settings