HP Smart Zero Core 4.4 Administrator Guide

Table C-6 root > ConnectionType > xen (continued)
Registry key Description
0=high
1=medium
2=low
root/ConnectionType/xen/general/speedScreen
root/ConnectionType/xen/general/tcpAccel
root/ConnectionType/xen/general/tcpAddresses/{UUID}/
address
root/ConnectionType/xen/general/
transparentKeyPassthrough
Can be set to Translated (Local), Direct in full screen
desktops only (FullScreenOnly), or Direct (Remote).
Indirectly maps to the Citrix INI file setting
TransparentKeyPassthrough=string, which enables
keyboard shortcut sequences defined by the local Windows
manager in the session. Keywords are Local, Remote, and
FullScreenOnly. The default is FullScreenOnly.
root/ConnectionType/xen/general/twredundantImageItems Controls the number of screen areas that will be tracked in
Thinwire 2 to prevent any redundant drawing of bitmap
images. An adequate vale for a session with 1024x768
resolution is 300. Use with EnableOSS=False, Default=0.
root/ConnectionType/xen/general/useAlternateAddress Directly maps to the Citrix INI file setting
UseAlternateAddress=boolean, which uses an
alternate address for firewall connections. The default is
False. All clients are set to 0 by default.
root/ConnectionType/xen/general/useBitmapCache Directly maps to the Citrix INI file setting
PersistentCacheEnabled=boolean. The default is
False. All clients are set to 0 by default.
root/ConnectionType/xen/general/useEUKS Controls use of Extended Unicode Keyboard Support on
Windows servers. The default is 0.
0—No EUKS
1—EUKS used as fallback
2—Use EUKS whenever possible
root/ConnectionType/xen/general/useLocalIM Directly maps to the Citrix INI file setting
useLocalIME=boolean, which uses the local X input
method to interpret keyboard input. This is supported only for
European languages. The default is True. All clients are set
to 1 by default.
root/ConnectionType/xen/general/waitForNetwork If set to 1, the connection will not be launched until
networking is available. This makes sure that, on a slow
network, the connection does not launch before networking
is available, causing a failure.
root/ConnectionType/xen/general/webcamSupport Select the appropriate option to use the webcam. Enable
HDX optimization for webcam, redirect the webcam to
VMware Horizon View, or disable it completely.
root/ConnectionType/xen/general/windowHeight If 'windowSize' is set to Fixed Size, this key will be used to
set the height of the window in pixels.
root/ConnectionType/xen/general/windowPercent If 'windowType' is set to Percentage of Screen Size, this key
will be used to set the size of the window. Valid values are 0–
100.
82 Appendix C HP Smart Zero Core registry settings