HP Smart Zero Core 4.4 Administrator Guide

Table C-5 root > ConnectionType > view
Registry key Description
root/ConnectionType/view/authorizations/user/add Indicates whether the user has permission to add a new
connection of this type using the HP ThinPro Control Center.
Not applicable to HP Smart Zero Core. Set to 1 to allow, 0 to
deny access.
root/ConnectionType/view/authorizations/user/general Indicates whether the user has permission to modify the
general settings for this connection type using the HP
ThinPro Control Center. Not applicable to HP Smart Zero
Core. Set to 1 to allow access, 0 to deny access.
root/ConnectionType/view/connections/{UUID}/ExtraArgs Specifies extra arguments to the VMware Horizon View
client. Run view_client --help or vmware-wiew --
help from a terminal to see all available arguments.
root/ConnectionType/view/connections/{UUID}/
afterStartedCommand
The full path to a script or binary to run after the connection
has been started.
root/ConnectionType/view/connections/{UUID}/
afterStoppedCommand
The full path to a script or binary to run after the connection
has finished.
root/ConnectionType/view/connections/{UUID}/appInMenu
root/ConnectionType/view/connections/{UUID}/
appOnDesktop
root/ConnectionType/view/connections/{UUID}/
attachToConsole
root/ConnectionType/view/connections/{UUID}/
authorizations/user/edit
Indicates whether the user has permission to modify the
connection settings for this connection. Set to '1' to allow
access, 0 to deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to '0'.
root/ConnectionType/view/connections/{UUID}/
authorizations/user/execution
Indicates whether the user has permission to execute the
connection. Set to 1 to allow access, 0 to deny access.
NOTE: The connection will always be available to launch in
Administrator Mode.
root/ConnectionType/view/connections/{UUID}/
autoReconnect
If 1, the system will attempt to automatically restart the
connection after it has been closed. If required, credentials
should be supplied through the zero-login/
defaultCredentials field. "autostart" is frequently used
in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autoReconnectDelay
Indicates the amount of time in seconds to wait before
restarting the connection. The default of 0 will cause the
connection to restart immediately upon close or disconnect.
This setting takes effect only when 'autoReconnect' is set to
1.
root/ConnectionType/view/connections/{UUID}/autostart If greater than 0
, the system will attempt to automatically
start the connection when the client is booted. If required,
credentials should be supplied through the zero-login/
defaultCredentials field. "autoReconnect" is frequently
used in conjunction with this setting.
root/ConnectionType/view/connections/{UUID}/
autostartDelay
Indicates the amount of time in seconds to wait before
starting the connection on boot. The default of 0 will cause
the connection to start immediately upon boot. This setting
takes effect only when 'autostart' is set to 1.
root > ConnectionType 69