HP Smart Zero Core 4.4 Administrator Guide

Table C-4 root > ConnectionType > freerdp (continued)
Registry key Description
resolution. This is frequently used to reduce network
bandwidth.
NOTE: Reducing color depth to a level not supported by
the video driver may cause screen corruption or launch
failures.
root/ConnectionType/freerdp/connections/{UUID}/
compression
If set to 1, compression of RDP data between client and
server will be enabled. Setting to '0' will disable compression.
Compression is enabled by default.
root/ConnectionType/freerdp/connections/{UUID}/
dependConnectionId
root/ConnectionType/freerdp/connections/{UUID}/directory
root/ConnectionType/freerdp/connections/{UUID}/
disableMMRwithRFX
If not 0, disables multimedia redirection if a valid remoteFX
session is established.
root/ConnectionType/freerdp/connections/{UUID}/domain The default domain to supply to the remote host during login.
If a domain is not specified, the default domain for the
remote host will be used.
root/ConnectionType/freerdp/connections/{UUID}/
extraEnvValues/{UUID}/key
root/ConnectionType/freerdp/connections/{UUID}/
extraEnvValues/{UUID}/value
root/ConnectionType/freerdp/connections/{UUID}/
fallBackConnection
When set to the UUID of another available connection, that
connection will be autostarted if the current connection fails
or experiences an error and fails to start. The UUID of the
desired fallback connection is typically found by running
'connection-mgr list' on the client, or by navigating to root/
ConnectionType/<type>/connections/.
root/ConnectionType/freerdp/connections/{UUID}/
frameAcknowledgeCount
Number of video frames the server can push without waiting
for acknowledgement from the client. Lower numbers result
in a more responsive desktop but lower frame rate. If set to
0, frame acknowledge will not be used in the client-server
interactions.
root/ConnectionType/freerdp/connections/{UUID}/
hasDesktopIcon
If set to 1, an icon for the connection will be shown on the
desktop. Not applicable to HP Smart Zero Core.
root/ConnectionType/freerdp/connections/{UUID}/label The name of the connection show in the HP ThinPro Control
Center. On HP Smart Zero Core, this will typically be set to
'Default Connection' and does not show in the user interface.
root/ConnectionType/freerdp/connections/{UUID}/
mouseMotionEvents
When set to 0, mouse motion events will not be sent to the
server. This may prevent some user feedback such as
tooltips from functioning properly.
root/ConnectionType/freerdp/connections/{UUID}/
offScreenBitmaps
When set to 0, off-screen bitmaps will be disabled. This
might slightly increase performance but will cause blocks of
the screen to be updated asynchronously, causing screen
transitions to update non-uniformly.
root/ConnectionType/freerdp/connections/{UUID}/password The default password to supply to the remote host during
login. This value will be stored encrypted. Generally this
setting is used for kiosk style applications where a generic
password is used for login.
root > ConnectionType 65