HP Smart Zero Core 4.4 Administrator Guide

Table C-3 root > ConnectionType > firefox (continued)
Registry key Description
root/ConnectionType/firefox/connections/{UUID} /
extraEnvValues/{UUID}/value
root/ConnectionType/firefox/connections/{UUID}/
fallBackConnection
When set to the UUID of another available connection, that
connection will be autostarted if the current connection fails
or experiences an error and fails to start. The UUID of the
desired fallback connection is typically found by running
'connection-mgr list' on the client, or by navigating to root/
ConnectionType/<type>/connections/.
root/ConnectionType/firefox/connections/{UUID}/fullscreen Enables the Web Browser to start in full-screen mode.
root/ConnectionType/firefox/connections/{UUID}/
hasDesktopIcon
If set to 1, an icon for the connection will be shown on the
desktop. Not applicable to HP Smart Zero Core.
root/ConnectionType/firefox/connections/{UUID}/kioskMode Enables the Web Browser’s Kiosk Mode.
root/ConnectionType/firefox/connections/{UUID}/label The name of the connection show in the HP ThinPro Control
Center. On HP Smart Zero Core, this will typically be set to
'Default Connection' and does not show in the user interface.
root/ConnectionType/firefox/connections/{UUID}/startMode If set to the default focus and the connection is already
started, the connection will be given focus. Otherwise, an
error will be returned stating that the connection is already
started.
root/ConnectionType/firefox/connections/{UUID}/
waitForNetwork
If set to 1, the connection will not be launched until
networking is available. This makes sure that on a slow
network, the connection does not launch before networking
is available, causing a failure.
root/ConnectionType/firefox/coreSettings/appName The internal application name to use when tracking the PID
of the connection for connection status monitoring. This key
should not need to be modified.
root/ConnectionType/firefox/coreSettings/className The internal X Windows application class name to use when
tracking the PID of the connection for connection status
monitoring. This key should not need to be modified.
root/ConnectionType/firefox/coreSettings/editor The internal application name to use when launching the
connection editor for this connection type. This key should
not need to be modified.
root/ConnectionType/firefox/coreSettings/
generalSettingsEditor
The internal application name to use when launching the
general settings editor for this connection type. This key
should not need to be modified.
root/ConnectionType/firefox/coreSettings/icon16Path The internal application icon path for the 16x16 pixel icon for
this application. This icon is the small icon to the left of the
connection name in the connection dialog.
root/ConnectionType/firefox/coreSettings/icon32Path The internal application icon path for the 32x32 pixel icon for
this application.
root/ConnectionType/firefox/coreSettings/icon48Path The internal application icon path for the 48x48 pixel icon for
this application. This is the large icon in the top left of the
connection editor for this connection type.
root/ConnectionType/firefox/coreSettings/label The name of the connection to display under the 'add' button
on HP ThinPro and in the connection selection screen on HP
Smart Zero Core.
root/ConnectionType/firefox/coreSettings/serverRequired Indicates whether a server name or address is unused,
optional, or required for this connection type.
62 Appendix C HP Smart Zero Core registry settings