HP Smart Zero Core 4.4 Administrator Guide

Table B-5 Login Screen > Common Attributes > size
Type Description
Parameter WWxHH, where WW is the width in absolute pixels or in a
percentage of screen width and HH is the height in absolute
pixels or in a percentage of the screen height.
Example size: 256x128;
Default The natural size of the element; for example, the pixel size of
an image.
Use Specifies the size of the element. Elements will be scaled to
match the specified size.
Table B-6 Login Screen > Common Attributes > position
Type Description
Parameter XX,YY where XX and YY are positions in absolute pixels or
in percentages of the screen width and height.
Example position: 50%, 90%;
Default 0,0 (the upper left)
Use Specifies the position of the element. See the alignment
table as well.
Table B-7 Login Screen > Common Attributes > alignment
Type Description
Parameter [left I hcenter I right] [top I vcenterIbottom]
Example alignment: left bottom;
Default hcenter vcenter—the element is centered at the given
position.
Use The combination of position and alignment specify both an
anchor point for the element and how the element is aligned
relative to that anchor point. For example, with a position of
90%,70% and an alignment of right bottom, the element is
positioned so that its right edge is at 90% of the width of the
screen and its bottom edge is at 70% of the height of the
screen.
Table B-8 Login Screen > Common Attributes > context
Type Description
Parameter [login I desktop I all]
Example context: login;
Default all
Use Specifies whether the element should be shown only on the
login screen for the protocol, on the desktop screen for the
50 Appendix B Customizing the client login screen