HP Smart Zero Core 4.4 Administrator Guide

Table 3-5 About this client—Net Tools (continued)
Option Description
The tool returns the IP of the server if it can be resolved.
Otherwise, it returns an error code and message.
Trace Route Use this tool to track the path that a network packet takes
from one device to another.
●
If successful, the tool reports the path it took through
each router or other network device to the
destination.
●
If unsuccessful, the tool returns an error message.
2. Type or select the options you want to monitor.
3. When completed, click Start Process.
Using the System Information tab
The System Information tab provides the following information about your client:
●
Platform
●
Total RAM
●
Serial number
●
OS kernel version
●
OS build ID
●
Main software installed
Using the Systems Logs tab
The System Logs tab displays all the logs placed on the following:
●
System kernel
●
X Server
●
HP Smart Zero Client Services
NOTE: To generate additional diagnostic reports or log information, select Enable Debug Mode.
This information might be requested by HP for troubleshooting purposes.
Hiding client information screens
1.
Click
, select Administrator/User Mode Switch, and then log in as the Administrator.
2.
Under
, select Additional Configuration > Advanced > X Terminal.
3. In the command prompt, enter regeditor.
4. In the Registry Editor, under root/SystemInfo/Pages, select the item corresponding to the tab
you want to hide:
●
General
●
NetTools
Using client information screens 7