HP Smart Zero Core 4.4 Administrator Guide

D VMware Horizon View USB configuration
This appendix includes the following topics:
●
USB options in previous HP Smart Zero Core releases
●
VMware Horizon View USB device families
USB options in previous HP Smart Zero Core releases
To disable USBR on audio devices:
1. In the client registry, modify the entry /etc/vmware/config.
2. Add the following line:
viewusb.ExcludeFamily = “audio-in;audio-out;”
To exclude or include a particular device:
1. Obtain that device’s VID and PID.
2. In the client registry, modify the entry /etc/vmware/config.
3. Add the appropriate line:
●
Viewusb.ExcludeVidPid = “vid-0f0_pid-0001;vid-**21_pid-*8*a;”
●
Viewusb.IncludeVidPid = “vid-003a_pid-1234”
NOTE: The information in this section does not apply to a Teradici-accelerated t410 unit. To control
USBR on that unit, upgrade to HP Smart Zero Core 4.3 or higher, which includes a built-in USB
Manager GUI.
NOTE: For more information on VMware Horizon View USB configuration, see Using VMware
Horizon View Client for Linux
at http://www.vmware.com.
VMware Horizon View USB device families
Table D-1 VMware Horizon View USB device families
Family Family name
Vendor vendor
Unknown unknown
Other other
Audio In audio-in
Audio Out audio-out
Communications comm
Human Interface Device hid
Bootable HID hid-bootable
USB options in previous HP Smart Zero Core releases 107