HP Smart Zero Core 4.4 Administrator Guide

Table C-28 root > vncserver (continued)
Registry key Description
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyShowTimeout
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyTimeout
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyUser
root/vncserver/gui/VNCShadowManager/widgets/
vncPassword
root/vncserver/gui/VNCShadowManager/widgets/
vncReadOnly
root/vncserver/gui/VNCShadowManager/widgets/
vncRefuseInDefault
root/vncserver/gui/VNCShadowManager/widgets/
vncTakeEffectRightNow
root/vncserver/gui/VNCShadowManager/widgets/
vncUsePassword
root/vncserver/gui/VNCShadowManager/widgets/vncUseSSL
root > zero-login
This section describes the registry keys, functions, options, and descriptions in the root > zero-login
folder.
Table C-29 root > zero-login
Registry key Description
root/zero-login/buttons/configure/authorized Enables or disables the configuration menu. If set to 0, users
will not be able to configure any device settings.
root/zero-login/buttons/info/authorized Enables or disables the system information panel. If set to 0,
users will not be able to view any information about the
system.
root/zero-login/buttons/shutdown/authorized Enables or disables the shutdown button on the login screen.
If set to 0, users will only be able to power off the device by
pressing the power button directly.
root/zero-login/controls/admin/authorized If set to 1, a user will be able to switch between User and
Administrator mode via the configuration menu. This might
be desirable in an environment where an Administrator
needs to change settings that are not normally available.
root/zero-login/controls/audio/authorized If set to 0, users will be unable to change the sound output
volume. This might be useful in an environment that should
have all sound muted or set to a specific volume. To fully
prevent users from changing sound output levels, be sure
root/users/user/apps/hptc-mixer/
authorizations is also set to 0.
root/zero-login/controls/connection/authorized If set to 0, users will be unable to redefine the connection
type. This is disabled by default because it is normally
104 Appendix C HP Smart Zero Core registry settings