HP Smart Zero Core 4.4 Administrator Guide

Table C-27 root > users (continued)
Registry key Description
root/users/user/apps/hptc-date-mgr/authorized If set to 0, users will not be able to access local client date
and time settings. This might be useful in an environment
where the client date and time is set by NTP.
root/users/user/apps/hptc-display-prefs/authorized If set to 0, users will not be able to modify the screen
resolution, bit depth, or refresh rate.
root/users/user/apps/hptc-display-prefs/t410aio/authorized If set to 0 users will not be able to modify the screen
resolution, bit depth or refresh rate.
root/users/user/apps/hptc-i18n-mgr/authorized If set to 1, the locales control panel item will be enabled for
users. This is normally disabled because it has a direct
control available from root/zero-login/controls.
root/users/user/apps/hptc-keyboard-layout/authorized If set to 1, the full keyboard layout control panel item will be
enabled for users. This is normally disabled because it has a
direct control available from root/zero-login/
controls.
root/users/user/apps/hptc-mixer/authorized If set to 0, the full-size mixer control panel will be disabled for
users. It is usually redundant, as the mini control covers the
same functions. To fully disable volume control, root/
zero-login/controls/audio/authorized must also
be set to 0.
root/users/user/apps/hptc-mouse/authorized If set to 0, users will not be able to modify local client mouse
settings. Users will still be able to modify mouse settings
through remote host settings.
root/users/user/apps/hptc-network-mgr/authorized If set to 0, users will not be able to access network settings.
This might be useful in a DHCP-only environment where all
network settings are given to clients by the DHCP server.
root/users/user/apps/hptc-printer-mapping-mgr/authorized If set to 0, users will not be able to set Windows driver values
for locally attached printers, which might prevent some
printers from mapping to remote sessions properly. This
setting does not affect USB redirection.
root/users/user/apps/hptc-printer-mgr/authorized If set to 0, users will not be able to set Windows driver values
for CUPS attached printers, which might prevent some
printers from mapping to remote sessions properly. This
setting does not affect USB redirection.
root/users/user/apps/hptc-profile-mgr/authorized If set to 0, users will not be able factory reset the client. The
only way to factory-reset a device if this control is disabled is
to update the client with a new configuration that has this
control enabled or to restore the factory image via USB key.
root/users/user/apps/hptc-root-xterm/authorized If set to 1, a root X terminal control panel item will be enabled
for users.
CAUTION: Enabling root terminal access is a security risk
and is not recommended in a production environment. The
root terminal should only be enabled for use in debugging a
protected, non-production environment.
root/users/user/apps/hptc-security/authorized If set to 1
, the security item will be enabled for users.
root/users/user/apps/hptc-shortcut-mgr/authorized If set to 1, the shortcut manager item will be enabled for
users.
root/users/user/apps/hptc-switch-admin/authorized If set to 1, the Admin/User mode Switch will be enabled for
users.
102 Appendix C HP Smart Zero Core registry settings