HP Smart Zero Core 4.4 Administrator Guide

Table C-21 root > printer-mapping-mgr
Registry key Description
root/printer-mapping-mgr/{UUID}/BaudRate For serial printers, this defines the baud rate of the printer.
By default, this will be set to 9600.
root/printer-mapping-mgr/{UUID}/Port An internal key used to identify the port, usually set to the
same as root/printers/{UUID}/Port.
root > printers
This section describes the registry keys, functions, options, and descriptions in the root > printers
folder.
Table C-22 root > printers
Registry key Description
root/printers/{UUID}/Active If set to 1, the printer will be marked active and can be
redirected to remote sessions.
root/printers/{UUID}/Port The port for the printer. For a local printer, this will frequently
be /dev/ttyS0, /dev/lp0, or /dev/ttyUSB0. If a network printer
is defined, this will be set to Network, and a 'ServerIP' key
will be defined with the IP address of the printer.
root/printers/{UUID}/PrinterMDL Set to the printer model. This is a text field used to identify
the printer in local and remote sessions.
root/printers/{UUID}/RemoteQueue
root/printers/{UUID}/ServerIP
root/printers/{UUID}/WindowsDriver Set to the exact Windows Driver model. This is used by RDP
and Citrix printer mapping to identify which printer driver to
install on the remote host.
root > screensaver
This section describes the registry keys, functions, options, and descriptions in the root > screensaver
folder.
Table C-23 root > screensaver
Registry key Description
root/screensaver/enableDPMS Set to 0 to disable monitor power management. This will
cause the monitor to stay on unless turned off manually.
root/screensaver/off Timeout delay to turn the monitor off (in minutes).
root/screensaver/standby Timeout delay to put the monitor into standby (in minutes).
root/screensaver/suspend Timeout delay to suspend the monitor (in minutes).
root > printers 99