HP Smart Zero Core 4.4 Administrator Guide

Table C-17 root > hpdm (continued)
Registry key Description
root/hpdm/agent/GetGroupsFromDHCP Set if there is a get groups from DHCP tag.
root/hpdm/agent/Interval_min The interval to pull a task from the HPDM Gateway.
root/hpdm/agent/LogLevel Sets the log level.
root/hpdm/agent/PreAssignGroups Use to specify grouping information.
root > keyboard
This section describes the registry keys, functions, options, and descriptions in the root > keyboard
folder.
Table C-18 root > keyboard
Registry key Description
root/keyboard/XkbLayout An internal key used to map the model/layout to an XKB
keyboard layout. This key should not need to be modified.
root/keyboard/XkbModel An internal key used to map the model/layout to an XKB
keyboard model. This key should not need to be modified.
root/keyboard/XkbOptions An internal key used to map the model/layout to XKB
keyboard options. This key should not need to be modified.
root/keyboard/XkbVariant An internal key used to map the model/layout to an XKB
keyboard variant. This key should not need to be modified.
root/keyboard/enable2 If set to 1, the secondary keyboard layout 'layout2' can be
switched to through the keyboard shortcut defined by
'switch'.
root/keyboard/layout The keyboard layout defines what symbols the keys
generate. This is frequently language dependent. English
(en), Spanish (es), French (fr), German (de), and Japanese
(jp) are the most common layouts.
root/keyboard/layout2 The secondary keyboard layout.
root/keyboard/model The keyboard model defines which keys are where on the
keyboard. The most common is the standard 'pc104' or
international 'pc105'. Other models are also supported.
root/keyboard/model2 The secondary keyboard model.
root/keyboard/numlock If set to the default 1, the numlock function will be turned on
at boot; otherwise, the numlock light will be turned off.
root/keyboard/rdp_kb An internal key used to map the model/layout to an RDP
keyboard map. This key should not need to be modified.
root/keyboard/switch Used to set the keyboard shortcut to switch between the first
and second layout, if 'enable2' is set. Valid values are
grp:ctrl_shift_toggle, grp:ctrl_alt_toggle, and
grp:alt_shift_toggle.
root > keyboard 97