HP Slate8 Pro Maintenance and Service Guide

Detach the LTE main and auxilliary antenna transceivers from the display panel assembly. (The LTE

antenna transceivers are attached to the display panel assembly with double-sided adhesive.)

3. Remove the LTE main and auxilliary antenna transceivers.

Reverse this procedure to install the LTE main and auxilliary antenna transceivers.

System board

Description Spare part number

System board equipped with an nVidia T40S quad core A15 1.80-GHz processor, 2.0-GB DDR3

system memory, and a 32-GB eMMC hard drive

743816-001

System board equipped with an nVidia T40S quad core A15 1.80-GHz processor, 1.0-GB DDR3

system memory, and a 16-GB eMMC hard drive

743815-001

Before removing the system board, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see

Back cover on page 13).

38 Chapter 5 Removal and replacement procedures