HP Slate8 Pro Maintenance and Service Guide

CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of

information. To prevent loss of information, save your work or shut down the tablet through Windows

before removing the battery.

Remove the battery:

Disconnect the battery cable (1) from the system board.

2. Remove the warranty tag (2) that covers the battery retention screw.

3. Remove the two Phillips PM1.5×3.0 screws (3) and the six Phillips PM1.5×2.5 screws (4) that

secure the battery to the display panel assembly.

4. Remove the battery (5).

Reverse this procedure to install the battery.

Battery