HP Slate8 Pro Maintenance and Service Guide

Remove the I/O board cable (3).

Reverse this procedure to install the I/O board cable.

Battery

Description Spare part number

Battery, 2-cell, 21-WHr, 2.84-AHr, LI (includes cable) 743821-001

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see

Back cover on page 13).

5. Remove the display panel cable (see

Display panel cable on page 14).

6. Remove the I/O board cable (see

I/O board cable on page 16).

WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a

replacement battery provided by HP, or a compatible battery purchased from HP.

18 Chapter 5 Removal and replacement procedures