HP Slate8 Pro Maintenance and Service Guide

Remove the display panel cable (3).

Reverse this procedure to install the display panel cable.

I/O board cable

Description Spare part number

I/O board cable 743830-001

Before removing the I/O board cable, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

Remove the back cover (see

Back cover on page 13).

16 Chapter 5 Removal and replacement procedures