User Manual

Additional options when faxing
The following settings are available in the Options list when faxing.
NOTE: The following list contains the master set of options available for HP LaserJet Enterprise MFP printers.
Some options are not available on all printers.
Original Sides Specify whether the original document is printed on one side or both sides.
Scan Mode Standard Document: Scan a page or stack of pages through the document feeder, or individually on the
atbed glass.
Book Mode: Scan an open book and output each page of the book onto dierent pages.
2-sided ID Copy: Scan each side of an identication card on the atbed glass and output them onto one
page. After scanning the rst side, the printer prompts to place the second side in the correct position
on the glass.
Resolution Specify the resolution of scanned images. Select a higher resolution to increase the clarity of the image.
However, as the resolution increases, the le size also increases.
Original Size Specify the paper size for the original document.
Content Orientation Specify whether the original document is printed in Portrait or Landscape orientation.
Image Adjustment Sharpness: Clarify or soften the image. For example, increasing the sharpness could make text appear
crisper, but decreasing it could make photos appear smoother.
Darkness: Increase or decrease the amount of white and black used in colors in scanned images.
Contrast: Increase or decrease the dierence between the lightest and the darkest color on the page.
Background Cleanup: Remove faint colors from the background of scanned images. For example, if the
original document is printed on colored paper, use this feature to lighten the background without
aecting the darkness of the image.
Automatic Tone: Available for Flow printers only. For original documents that have at least 100
characters of text on the page, the printer can detect which edge is the top of the page, and it orients
the scanned images appropriately. If some of the pages are upside-down in relation to the other pages,
the resulting scanned image has all pages right-side-up. If some of the pages have a landscape
orientation, the printer rotates the image so that the top of the page is at the top of the image.
Optimize Text/Picture Optimize the job for the type of image being scanned: text, graphics, or photos.
Blank Page Suppression Exclude blank pages in the original document from scanned images. This feature is useful for scanning
pages printed on both sides to eliminate blank pages in the resulting scanned document.
Multi-feed Detection Enable or disable multi-feed detection. When enabled, scanning stops when the printer detects more
than one page at a time being fed in the document feeder. When disabled, scanning continues when a
multi-feed is detected, to allow scanning pages that are stuck together, originals with self-adhesive
notes on them, or thick paper.
Collate Assemble each set of pages in the same order as the original document when making multiple copies
of a document.
Notication Select whether to send notications of the status of scan jobs. The printer can print the notication, or
it can send the notication in an email.
116 Chapter 7 Fax ENWW