HP Z440 Workstation QuickSpecs

Integrated Intel I218LM
PCIe GbE Controller
Connector RJ-45 (motherboard integration)
Controller Intel I218LM GbE platform LAN connect networking controller
Memory 3 KB FIFO packet buffer memory (both Tx and Rx)
Data Rates Supported 10/100/1000 Mbps
Compliance 802.1as, 802.1p, 802.1Q, 802.3, 802.3ab, 802.3az, 802.3i, 802.3u, 802.3x,
802.3z
Bus Architecture PCI Express 1.1 (x1) and SMBus
Data Path Width X1, 250 MB/s, Bi-directional interface
Data Transfer Mode PCIe-based interface for active state operation (S0 state) and SMBus for host
and management traffic (Sx low power state)
Power Requirement Requires 3.3V only (integrated regulators)
Boot ROM Support Yes
Network Transfer Rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Management Capabilities WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable
diagnostics
AMT 9.1 support, vPro compliant
HP X520 10GbE Dual Port
Adapter
Hardware Certifications FCC B, UL, CE, VCCI, BSMI, CTICK, KCC
HP 10GbE SFP+ SR
Transceiver
Operating Temperature 0°C to 45°C (32°F to 113°F)
Operating Humidity 0% to 85%, noncondensing
Dimensions (H x W x D) 0.47(h) x 0.54(w) x 2.19(d)inches
(1.19 x 1.38 x 5.57 cm)
QuickSpecs
HP Z440 Workstation
Technical Specifications - Networking and Communications
DA - 15077 Worldwide QuickSpecs — Version 2 — 10/1/2014 Page 59