HP StorageWorks 9100 Extreme Data Storage System V1.0.2 wiring diagrams for base cabinet configurations (AN540-96013, June 2009)

ManualsBrandsHP ManualsStorageExtreme Data Storage

HP StorageWorks 9100 Extreme

Data Storage System V1.0.2

wiring diagrams for base cabinet

configurations

Second edition: June 2009

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

AN540-96013

HP technical support

For worldwide technical support information, see the HP support website:

ttp://www.hp.com/support

Before contacting HP, collect the following information:

• Product model names and numbers

• Technical support registration number (if applicable)

• Product serial number

• Diagnostic details—Run the exdsmgr escalate command to

produce a diagnostic report (see the HP StorageWorks ExDS9100

Storage System administration guide for more information).

• Operating system type and revision level

• Detailed questions

IMPORTANT:

For warranty purposes, when reporting an issue to HP, provide

the serial number located on the storage block components.

Additional information

For additional information, see the following HP websites:

•h

ttp://www.hp.com

•http://www.hp.com/go/storage

• To locate the HP ExDS9100 documents, go to http://www.hp.com/

go/exds/support, and then click the Manuals link.

• HP StorageWorks 9100 Extreme Data Storage System getting

started guide

• HP StorageWorks 9100 Extreme Data Storage System wiring

diagrams for expansion cabinet configurations

• HP StorageWorks 9100 Extreme Data Storage System adminis-

tration guide

Page 1

Summary of content (5 pages)

PAGE 1
HP StorageWorks 9100 Extreme Data Storage System V1.0.2 HP technical support For worldwide technical support information, see the HP support website: wiring diagrams for base cabinet configurations http://www.hp.
PAGE 2
Front and back views of a minimum base cabinet 1. ExDS9100c 1 2. TFT monitor and keyboard 3. c-Class Blade Enclosure 4. ExDS9100cx 1 Page 2 1. Management switch 2 4. TFT monitor and keyboard 2. Management switch 1 5. c-Class Blade Enclosure 3. ExDS9100c 1 6.
PAGE 3
Front and back views of a full base cabinet 1. Management switch 2 7. ExDS9100cx 4 1. ExDS9100c 4 6. ExDS9100cx 3 2. Management switch 1 8. ExDS9100cx 3 2. ExDS9100c 3 7. TFT monitor and keyboard 3. ExDS9100c 4 9. TFT monitor and keyboard 3. ExDS9100c 2 8. c-Class Blade Enclosure 4. ExDS9100c 3 10. c-Class Blade Enclosure 4. ExDS9100c 1 9. ExDS9100cx 2 5. ExDS9100c 2 11. ExDS9100cx 2 5. ExDS9100cx 4 10. ExDS9100cx 1 6. ExDS9100c 1 12.
PAGE 4
Storage block cabling A storage block is comprised of the HP ExDS9100c and HP ExDS9100cx. SAS switch cabling NOTE: CAUTION: Callouts 1 through 3 indicate additional HP ExDS9100c components. Correct cabling of the storage block is critical for proper HP ExDS9100 Storage System operation. 1. ExDS9100c 2. ExDS9100cx primary I/O module (drawer 2) 3. ExDS9100cx secondary I/O module (drawer 2) 4. ExDS9100cx primary I/O module (drawer 1) 5. ExDS9100cx secondary I/O module (drawer 1) 1.
PAGE 5
Six VC modules Virtual Connect Ethernet wiring The following legend applies to both of the Virtual Connect (VC) wiring diagrams. Stacking link Available uplink port Management network Onboard Administrator 1. Management switch 2 7. Bay 5 (for connection to site network [eth2]) 2. Management switch 1 8. Bay 6 (for connection to site network [eth3]) 3. Bay 1 (management network [eth0]) 9. Bay 7 (optional — can be populated with a 1/10Gb-F VC module [eth4]) 4.