HP StorageWorks 9100 Extreme Data Storage System release notes V1.0.2 (AN540-96015, June 2009)

• 25166: When the syscheck command reported a degraded LUN, it identified all arrays as the

location of the LUN. This has been corrected.

• 25282: When an ExDS system is powered on from a fully down state, the system required a reboot

of one or more blade servers. The system now boots to an operational state without manual inter-

vention.

• 25295: The daily purge process for /var was broken. This is now fixed.

• 25330: In some situations, a server blade can crash with psfs_mpbbuf.c:254 assertion

failure. This problem has now been resolved.

• 25556: Resolved a problem where a blade server panics when booted with system under heavy

load.

• 24760: Fixed issues with the exdsmgr identify storage command.

Operating systems

Linux

Languages

English

Update procedure

This section describes how to update a system from version 1.0 or 1.0.1 to version 1.0.2.

1. Ensure that all servers are booted and in the running state. Do not proceed with the following

steps until all servers are in the running state.

2. Copy the update tarball to the first blade server on the system to be updated. For example, for

a system called glory, use the following command:

# scp ExDS-1.0.2-4811_update.tar.gz glory1:/tmp/

3. Log into the system, change directory to /tmp, and extract the tarball.

# cd /tmp

# tar -xzf ExDS-1.0.2-4811_update.tar.gz

4. Update the system software by running the following commands:

# cd ExDS-1.0.2-4811_update

# ./InstallUpdate1.0.2.sh

Output from the command is similar to the following: